Boot Console Interface
Displaying the Status of the EISA Slots
Displaying the Status of the EISA Slots
The eisa command lets you identify all EISA cards
currently installed on your workstation by showing
you the current status of your workstation's three
EISA slots. It is available only in the Information
Menu.
To use the eisa command from the Information Menu
of the boot console interface, type:
eisa
The following table appears:
Slot #
Slot State
-------
------------
1
Empty
2
Unconfigured
3
Empty
In the table above, "Slot #" is the slot number as seen
on the back of your workstation; "Slot State" is the
current state of any card in each slot; and "Device
Information" is the compressed EISA ID, read from
the EISA card itself.
160
Device Information
--------------------
Empty
HWP1850
Empty