Storing Maintenance Information - WAGO 765-1505/100-000 Product Manual

Commissioning
#
0
1
2
• If static configuration is used, specify the IP address and subnet mask manually (the
gateway IP address is optional).
Parameter
Device IP address
Subnet mask
Gateway IP address Gateway IP address for the ETHERNET configuration with static IP address configura-
Other tabs under the menu item Settings are described below.

10.3.1.4.3 Storing Maintenance Information

On the Maintenance Information tab, you can store maintenance information, such as
the device name, the installation location and date, contact information, a description text
or the date of the last and next product service.
Changes to settings require operator or admin rights. If you do not have these, the Main-
tenance Information tab is grayed out and cannot be edited.
The maintenance information includes:
66 Product manual | Version: 2.0.0
8DIO FLD EI DC 24V 2.0A
Option Description
STATIC The module's IP address is configured statically. This is done using the module IP ad-
dress, the subnet mask and the gateway IP address entered on the "Device configura-
tion" tab.
BOOTP The module gets its IP address with the BOOTP protocol.
DHCP The module gets its IP address with the DHCP protocol. This is the standard setting.
Settings/Action
IP address for the ETHERNET configuration with static IP address configuration
Subnet mask for the ETHERNET configuration with static IP address configuration
tion
Figure 17: Settings Menu Item, Maintenance Information Tab (Example View)
Table 40: Configuration Control Drop-Down Menu
Table 41: Device Configuration Tab – Parameter Overview
765-1505/100-000