Start-Up - Panasonic LP-GS Series Operation Manual

Start lines of characters are distorted
Characters are distorted or character pitch is unstable
External control
Communication with the external device does not start
Communication with the external device does not start
Marking ready output does not turn on
A negative response is returned
Linking of image processing devices
Linking of an imagechecker and/or a code reader fails
Position correction fails
Code or character reading results are NG
Marking result is uneven, characters are deformed
27.2

Start-up

When the system does not start, check the power cable, position of the key switch, or
condition of the fuse or circuit protector.
Power supply is not turned on or system does not start
Cause:
The power cable is not connected.
Remedy:
Connect the power supply cable.
Cause:
The key switch is not turned on.
Remedy:
Turn the key switch on the front of the controller from 0 to I.
Cause:
Power is not supplied.
Remedy:
Check the power supply.
ME-NAVIS2-OP-1
(page 307)
(page 312)
(page 314)
(page 317)
(page 317)
27 Troubleshooting
(page 307)
(page 309)
(page 309)
(page 316)
(page 318)
295