Panasonic LP-GS Series Operation Manual page 138

12 Shape object
(2)
(X, Y)
(1) Start point ("X-position of start point [mm] ", "Y-position of start point [mm]")
(2) End point ("X-position of end point [mm] ", "Y-position of end point [mm] ")
(3) "Radius [mm]"
(4) "Direction" > "CCW"
(5) "Direction" > "CW"
(6) "Angle" > "<180°"
(7) "Angle" > "≥180°"
8.
9.
10.
Related topics
Create a line
Create a circle
Add or delete shapes in an existing shape object
Position or rotate a shape object
General object/object group parameters
Set laser correction parameters for a marking object
138
(5)
(1)
(X, Y)
(6)
(4)
(3)
(6)
(3)
Select "Dash line" to apply dash settings to the arc's stroke.
Specify values for "Dash length [mm] " and "Gap length [mm] ".
(1)
(1) "Dash length [mm] "
(2) "Gap length [mm] "
Select "OK".
The shape object is displayed in the marking image editor and is highlighted in the
object list.
To edit the parameters of the shape object, select the object in the object list or in the
marking image editor.
The parameters are displayed in the category below the object list.
(page 135)
(page 136)
(5)
(7)
(3)
(1)
(X, Y)
(2)
(page 139)
(page 139)
(page 90)
(page 238)
(2)
(X, Y)
(3)
(7)
(4)
ME-NAVIS2-OP-1