Establish A Bluetooth Connection Between Pc And Laser Marking System - Panasonic LP-GS Series Operation Manual

4 Online connection between PC and laser marking system
9. Select "Connect" to establish the connection.
When the online connection is established, a dialog opens and shows a list of all
marking files saved on the laser marking system.
Do not turn off the power supply during an online connection with your PC. Otherwise a data loss or
system failure may occur.
Do not disconnect the LAN cable while the laser marking system is online.
Note
• The online connection between the laser marking system and the PC is disabled when
the PC goes into sleep mode. When the laser marking system is in remote or RUN mode,
the operation mode (remote or RUN mode) is maintained, but the online connection is
disabled. Deactivate the sleep mode setting of the PC to prevent a disconnection.
• One PC can be connected with multiple laser marking systems. However, you can only
establish one online connection at a time. The laser marking system which is connected
is displayed in the "Connection" dialog together with the online mode icon. To configure
and to control more than one laser marking system, you must switch the connected
device in the software.
• If your version of Laser Marker NAVI smart does not support the connected laser marker
model, some functions and operations cannot be set or executed online.
Related topics
Specify Ethernet communication settings
Start Laser Marker NAVI smart
4.4

Establish a Bluetooth connection between PC and laser marking system

The PC and the laser marking system can be connected via USB, Bluetooth, or Ethernet.
You must enable Bluetooth in the communication settings.
• For Bluetooth connections, place the laser head and the Bluetooth-enabled PC in such a
way that the connection is not disturbed by interferences.
• Before you can make a Bluetooth connection, you must make the appropriate
communication settings in Laser Marker NAVI smart. Connect the PC via USB to make
these settings.
• The following models have an integrated Bluetooth antenna and transmitter in the laser
head LED display:
LP-GS051, LP-GS051-E, LP-GS051-L, LP-GS051-LE, LP-GS052, LP-GS052-E
1. Start the laser marking system.
2. Start Laser Marker NAVI smart.
42
(page 266)
(page 26)
ME-NAVIS2-OP-1