Align A Truetype Object - Panasonic LP-GS Series Operation Manual

10 TrueType object
2. For "Character arrangement", you can select that the text is arranged along a straight
line or along the outer or inner side of an arc.
(1) "Straight line (horizontal)"
(2) "Arc outside"
(3) "Arc inside"
3. For TrueType objects along an arc, you can specify an arc radius value under "Arc
radius [mm]".
(1) Arc radius ("Arc outside")
(2) Arc radius ("Arc inside")
Related topics
Set the character spacing of a TrueType object along a straight line
Set the character spacing of a TrueType object along an arc
10.4

Align a TrueType object

Specify the horizontal alignment of a TrueType object. For objects along a straight line, you
can also specify the vertical alignment.
The "Horizontal alignment" and "Vertical alignment" settings influence the reference point
position of text objects along a straight line.
1. To edit the parameters of the TrueType object, select the object in the object list or in the
marking image editor.
The parameters are displayed in the category below the object list.
110
(1)
(1)
(2)
(2)
(3)
(page 113)
(page 115)
ME-NAVIS2-OP-1