Remote Mode; Switch Remote Mode On And Off By Pc Configuration Software - Panasonic LP-GS Series Operation Manual

5 Operation of the laser marking system
5.5

Remote mode

5.5.1

Switch remote mode on and off by PC configuration software

Unless you changed the initial setting, the laser marking system can be switched to remote
mode in Laser Marker NAVI smart.
Make sure that "PC configuration software" (initial setting) is selected for "Remote mode
switching method" in the "System settings" screen of Laser Marker NAVI smart. If "I/O" is
selected for "Remote mode switching method", you cannot switch remote mode on and off by
PC configuration software.
1. Establish an online connection between your PC and the laser marking system.
2. Select the "Operation" tool.
"Operation" tool icon
3. In the dialog, select "Remote ON".
Select "Yes" to confirm.
When shifting to remote mode while editing in the "Marking settings" screen, a file
saving confirmation message appears. After saving the file, the screen shifts to the
"Monitor" view.
The icon of the "Operation" tool changes to indicate that the laser marking system is in
remote mode.
Icon indicates that remote mode is on
4. To deactivate remote mode, select the "Operation" tool and "Remote/RUN OFF".
Related topics
Automatically switch to remote mode at power-on
Switch remote mode on and off by external devices
Specify remote mode settings
48
(page 49)
(page 50)
(page 257)
ME-NAVIS2-OP-1