Change The Appearances Of User Interface Elements - Panasonic LP-GS Series Operation Manual

5. To close the dialog, select "Close" or "X".
Related topics
Monitor the marking data in remote mode or RUN mode
2.3

Change the appearances of user interface elements

You can customize the colors of objects in the marking image editor and the appearance of
elements such as grid line type or color of rulers.
1. On the "Startup" screen, select "Preferences".
2. Select "Color and appearance".
3. In the dialog, configure any of the following settings:
•
•
•
4. Select "Apply" to save your settings.
To restore the default settings, select "Reset to default".
5. To close the dialog, select "Close" or "X".
Related topics
User interface overview
Marking image editor
ME-NAVIS2-OP-1
"Grid line": Specify the appearance of the grid lines in the marking image editor.
‒ "Grid line spacing [mm]"
‒ "Color of grid lines"
‒ "Grid line type"
"Marking data": Choose the desired display colors for various objects.
‒ "Color of marking objects"
‒ "Color of selected objects"
‒ "Color of masked objects"
‒ "Color of step & repeat objects"
"Background": Specify the appearance of interface elements in the marking image
editor.
‒ "Background color of marking field"
‒ "Color of center lines"
‒ "Center line type"
‒ "Color of rulers"
‒ "Color of workpiece reference boundary" (LP-RC, LP-RF, LP-RV)
‒ "Type of workpiece reference boundary" (LP-RC, LP-RF, LP-RV)
(page 31)
(page 83)
2 Laser Marker NAVI smart preferences
(page 285)
29