Specify The Line Spacing Of A Character Object - Panasonic LP-GS Series Operation Manual

9 Character object
5. If you select "Proportional 1", specify the width of a blank character under "Space width
[mm]".
Related topics
Specify parameters under "Compatibility with former models"
Set the character spacing of a character object along an arc
9.12

Specify the line spacing of a character object

If a character object consists of multiple text lines, you can specify the vertical distance
between them. Line spacing can be set for character objects along a straight line and along
arcs.
1. To edit the parameters of the character object, select the object in the object list or in the
marking image editor.
The parameters are displayed in the category below the object list.
2. Input a value for "Linefeed spacing [mm]". The line spacing is the vertical distance
between lines of text.
(1)
(1) Line spacing ("Straight line (horizontal)")
For arcs with multiple lines of text, the arc radius of the second or subsequent text lines
is increased or reduced with the line spacing value.
(1) Line spacing ("Arc outside, char. spacing by angle")
(2) Line spacing ("Arc inside, char. spacing by angle")
106
(1) (2)
(page 228)
(page 102)
ME-NAVIS2-OP-1