Honda NC700 2012 Service Manual page 121

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
HEADLIGHT/FRONT CENTER COWL (NC700X/XA/XD)
REMOVAL/INSTALLATION
Remove the following:
– Meter stay (page 2-24)
– Front under cover (page 2-25)
– Inner upper cover (page 2-25)
Release the front turn signal light 3P connectors [1] from the wire bands [2].
Disconnect the headlight 3P (Black) connector [3] and front sub harness 6P (Brown) connector [4].
Remove the bolts [5].
Release the headlight boss [6] from the frame grommet [7] and remove the front center cowl/headlight [8].
Installation is in the reverse order of removal.
Route the wire harness properly (page 1-25).
[5]
DISASSEMBLY/ASSEMBLY
Remove the bolts [1] and front center cowl [2] from the headlight unit [3].
Remove the socket bolts [4] and headlight stay [5] from the headlight unit.
Assembly is in the reverse order of disassembly.
[2]
2-26
[5]
[1]
[8]
[6] [5]
[1]
[2] [3]
[7]
[5]
[1]
[2]
[5]
[4]
[4]
[3]