Honda NC700 2012 Service Manual page 498

dummyhead dummyhead
CRANKCASE SEPARATION
For Service Information for removal of necessary parts
before separating the crankcase (page 14-4).
Remove the cam chain [1] from the crankshaft.
Remove the crankcase 8 mm bolts [1] and sealing
washer [2].
Place the engine upside down.
Loosen the crankcase 10 mm bolt [1], 8 mm bolts [2], 8
x 45 mm bolts [3] and 6 mm bolts [4] in a crisscross
pattern in 2 or 3 steps, and remove the bolts.
Loosen the crankcase main journal bolt [1] in a
crisscross pattern in 2 or 3 steps, and remove them.
Separate the lower crankcase [2] from the upper
crankcase.
Do not ply the crankcase halves with a screwdriver.
CRANKCASE/TRANSMISSION/BALANCER
[1]
[1]
[1]/[2]
[3]
[2]
[1]
[2]
[4]
[1]
14-7