Honda NC700 2012 Service Manual page 582

dummyhead dummyhead
Disconnect the brake light switch connectors [1].
Remove the bolts [2], holder [3] and master cylinder [4].
Keep the brake master cylinder upright to prevent air
from entering the hydraulic system.
Remove the screws [1].
Separate the right handlebar switch housing [2].
Remove the screws [1].
Separate the throttle housing [2].
Disconnect the throttle cables [3] from the throttle pipe
[4], then remove the throttle pipe [5].
Hold the handlebar [1] and remove the bolts [2] and
holder [3].
FRONT WHEEL/SUSPENSION/STEERING
[4]
[1]
[1]
[1]
[3]
[2]
[2]
[2] [4] [5]
[3]
[2]
[3] [1]
17-11