Honda NC700 2012 Service Manual page 270

dummyhead dummyhead
Lower the radiator and disconnect the crankcase
breather hose [1].
Be careful not to damage the radiator fins.
Loosen the air cleaner connecting hose band screw [1].
Remove the bolts [2] and collar [3].
Disconnect connecting hose and remove the air cleaner
housing [4].
Installation is in the reverse order of removal.
• Route the wire harness and hoses properly (page 1-
25).
• Make sure the radiator mounting rubber slits facing
down.
• Align radiator lower stay slit with cylinder head tab.
TORQUE:
Air cleaner connecting hose band screw:
1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)
THROTTLE BODY
REMOVAL
Remove the air cleaner housing (page 7-14).
Disconnect the sensor unit 5P (Black) connector [1] and
IACV 4P (Black) connector [2].
Loosen the throttle cable A adjuster lock nut [1] and
adjusting nut [2] then disconnect the throttle cable A [3]
from the throttle drum and cable stay.
Loosen the throttle cable B lock nut [4] then disconnect
the throttle cable B [5] from the throttle drum and cable
stay.
[1]
[4]
[1]
[2]
[1] [2]
[3]
FUEL SYSTEM
[2] [3]
[1]
[5] [4]
7-15