Javad TRIUMPH-LS User Manual page 24

to select from two different methods for scanning local UHF
interference.
For most day to day purposes, check the Frequency List
Scanner and then tap Scan. This method then will focus
exclusively on those frequencies that you've entered from
your FCC license (or the default values from the factory
settings). This is a quick and robust analysis tool to help you
choose what channels to avoid and the channels to use for
your own needs.
The channel that your rover is tuned to will be displayed
in red. If your radio is already on and broadcasting nearby,
you'll see its graphical RSSI. Note that when returning to
the UHF Radio Status screen the communications will
once again be re-initiated so expect a little delay of several
seconds before Received, Lost, RSSI and the other dynamic
values become updated.
24 www.javad.com
Introduction