Page 1
VERSION 1.0 LAST REVISED AUGUST 16, 2021 All contents in this manual are copyrighted by JAVAD GNSS. All rights reserved.The information contained herein may not be used, accessed, copied, stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express...
RTPK on TRIUMPH-LS 1. Check RTPK Options Check that the RTPK option is available on your TRIUMPH-LS. Go to Support > Options and tap Check (Figure 1): Figure 2. Setting up RTPK Activate all RTPK functions and set up the parameters (Figure 3): Figure 1.
Data Split Interval Auto-Start period 4. Activate RTPK in Collect screen (Figure 7). For activating RTPK option in Collect screen tap long click on the white box (about 2 sec) to switch in the Groups screen. Click “Setups: margins, signals (etc.)”...
Figure 11. Point solution 1 Figure 9. The results 6. Manual start RTPK When the manual start of the RTPK is used, there are the same procedures and results. The difference is that you can stop the survey and start RTPK processing without waiting for automatic completion.
Need help?
Do you have a question about the RTPK and is the answer not in the manual?
Questions and answers