Single Point Localization (Unknown) - Javad TRIUMPH-LS User Manual

The resulting coordinates are now displayed for the base
location with the option to save the base as a point in the
Coordinate List. I have selected "Yes", and pressing "OK"
leads to the Point Name screen, where I have named the
new base location "Base1".
138
Now that we have the base station coordinates determined
based on our control points, we must now return to the
base and configure it again, this time using "Select from
List" for the base position and recalling the new base point
created in localization.
All subsequently surveyed points will be related to the
autonomous base position until the base is reinitialized using
the localized base position. Once the base is reinitialized
through SETUP>EDIT
subsequently surveyed points will be related to the new
base location. It is good practice to return to a known point,
preferably a point not used for localization if possible, and
stakeout this point to verify that the results are as expected.

Single Point Localization (Unknown)

Single Point Localization To Single Point In Unknown
Coordinate System
Goal
To create a new coordinate system based on an arbitrary
grid origin. This method would be useful for creating a
coordinate system with a grid origin defined by the user
Localization
and BASE/ROVER SETUP,
www.javad.com
all