Timing; User Defined Buttons - Javad TRIUMPH-LS User Manual

on the date and time that is displayed at the bottom of the
Home screens.
local time; e.g., UTC-4 for Eastern Daylight, J-Field will recall
that setting regardless of your Setup or Project.
Aside from knowing at a glance what time of day it is,
many files that J-Field writes are time-stamped including
screenshots, photos, and audio files which can be very
helpful during the job and well afterwards.
You can also schedule audible alarms for yourself, but don't
forget to turn the sounds back on if you've set the volume
on mute.
It is also possible to schedule your survey to begin at a fixed
moment in time; for example, this would be handy if you're
coordinating multiple static sessions across a large area and
wanted them to all begin collecting data at the same time.
10

Timing

Tap on this icon to bring up
the dialog for setting how
time gets displayed in J-Field.
Alternatively, you can bring
up these settings by tapping
Time display
an example of a
global setting. The
default
setting is
but once you've
tapped on
Local Time Zone
field, set it to your

User Defined Buttons

The U1 through U4 User Defined Buttons can be assigned
from Setup with the Assign U1-U4 button:
is
global
UTC,
the
Assign Action U1 Screen - Available Options
Introduction
www.javad.com