Javad TRIUMPH-LS User Manual page 130

populates the list with Geodetic values (generally based on
survey observations made with a Javad receiver and J-Field)
and the Localize routine determines a transformation to
satisfy the two lists (Design and Surveyed).
In this example I'm localizing to a single Control point,
"1104".
On the right side, I've changed the Surveyed Coordinate
System to my selected Coordinate System.
130
Next I need to Add a Survey point on the right side. If I've
already surveyed this point, I could recall it from the Point
List by "Copy from List" or graphically select it from the map
by "Pick from the Map. " For this example, I've decided to add
by Survey.
In this example, I've surveyed point 1104 with the TRIUMPH-
LS. Notice the "Fixed" indicator shows that the LS is fixed, the
epoch by epoch RMS is low.
Localization
www.javad.com