Javad TRIUMPH-LS User Manual page 134

The resulting coordinates are now displayed for the base
location with the option to save the base as a point in the
Coordinate List. I have selected "Yes", and pressing "OK"
leads to the Point Name screen, where I have named the
new base location "Base1".
Now that we have the base station coordinates determined
based on our control point, we must now return to the
base and configure it again, this time using "Select from
List" for the base position and recalling the new base point
created in localization. All subsequently surveyed points will
be related to the autonomous base position until the base is
reinitialized using the localized base position. Once the base
is reinitialized through SETUP>EDIT and BASE/ROVER SETUP,
all subsequently surveyed points will be related to the new
base location. It is good practice to return to a known point,
preferably a point not used for localization if possible, and
stakeout this point to verify that the results are as expected.
134 www.javad.com
Localization