Special Function Unit/Block - Mitsubishi Electric FX3S Series User Manual

FX /FX /FX
3S 3G 3GC
Common Items
1.2.4

Special Function Unit/Block

Connect a special function unit/block to the FX
special function unit can individually control positioning operations.
1. System configuration for FX
Up to 8 special function units/blocks can be connected to the FX
2. System configuration for FX
Up to 8
FX
2NC
FX
*1.
*2.
3. Individual operation (FX
Without connecting special function units (FX
individually.
• FX
2N
• FX
2N
In addition, up to 48 I/O points can be added.
FX -10GM
2N
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
FX PLC
3U
For details on system configuration, refer to the FX
*1
special function units/blocks can be connected to the FX
-CNV-IF or FX -1PS-5V is needed to connect special function units/blocks.
3UC
FX -1PS-5V
3UC
PLC or
3UC
FX -CNV-IF
2NC
Up to 7 special function units/blocks can be connected to the FX
The unit/block number begins with "No. 1" when special function unit/blocks are connected to the
FX -32MT-LT(-2) PLC.
3UC
For details on system configuration, refer to the FX
-10GM, FX
2N
-10GM can control one 1-axis servo motor or stepping motor.
-20GM can control two 1-axis servo motors or stepping motors.
1-axis
Servo motor
(Servo amplifier)
search engine
/FX PLC to control positioning operations. Note that a
3U 3UC
PLC
3U
Special function block
Special function unit
No.0 to No.7
Up to 8 units
PLC
3UC
Special function block
Special function unit
*2
No.0 to No.7
Up to 8 units
-20GM)
2N
-10GM, FX
2N 2N
FX -20GM
2N
1.2 Introduction of Products Needed for Positioning
PLC.
3U
Servo motor
(Servo amplifier)
3U
PLC.
3UC
Servo motor
(Servo amplifier)
-32MT-LT(-2) PLC.
3UC
3UC
-20GM) to the PLC, you can operate them
1-axis
Servo motor
(Servo amplifier)
(Servo amplifier)
1 Introduction
A
B
Apx.
Hardware Edition.
Hardware Edition.
2-axes
Servo motor
A - 7