Mitsubishi Electric FX3S Series User Manual page 231

FX /FX /FX
3S 3G 3GC
Example Connection
FX
Programmable Controllers
User's Manual [Positioning Control Edition]
Appendix: Example Connection
Foreword
To use the positioning function of the MELSEC-F FX
this manual, the PLC should be connected to a servo amplifier drive unit. The Appendix, therefore, describes
how to connect the PLC to a servo amplifier drive unit and should be read and understood before attempting
to install or use the unit.
Store this manual in a safe place so that you can take it out and read it whenever necessary. Always forward
it to the end user.
This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent
licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property
rights which may occur as a result of using the contents noted in this manual.
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
/FX /FX
3S 3G 3GC
© 2005 MITSUBISHI ELECTRIC CORPORATION
search engine
/FX /FX Series
3U 3UC
/FX /FX
3S 3G
/FX /FX Series PLC described in
3GC 3U 3UC
A
B
Apx.
Apx. - 1