Introduction; Outline - Mitsubishi Electric FX3S Series User Manual

FX /FX /FX
3S 3G 3GC
Common Items
1.

Introduction

This manual describes the positioning control for the FX
In this chapter, a brief description of the positioning products is provided.
1.1

Outline

The FX
to control the positioning operation.
Increase the pulse frequency to increase the motor speed. Increase the number of pulses to increase the
number of motor revolutions. In other words, set the pulse frequency to determine the workpiece transfer
(positioning) speed.
Set the number of pulses to determine the workpiece transfer distance.
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
/FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Servo motor or
stepping motor
Pulse frequency
Number of
pulses
search engine
/FX
3S 3G
PLC outputs the pulse signal to the servo motor and the stepping motor
Pulse train signal
: Transfer speed
: Transfer distance
Positioning command
Workpiece (item to be positioned)
/FX /FX /FX PLC.
3GC 3U 3UC
FX /FX /FX /FX
3S 3G 3GC
1 Introduction
1.1 Outline
A
B
Apx.
/FX PLC
3U 3UC
A - 3