Mitsubishi Electric FX3S Series User Manual page 203

FX /FX /FX
3S 3G 3GC
Built-in Positioning Functions
4
Transfer the parameters (+ sequence program) to the PLC.
1. Select "Online" from the tool menu, and then select "Write to PLC". The online data
operation screen will appear.
2. Enter a check in the "Parameter" check box, and then click the "Execute" button.
The selected parameter data will be transferred to the PLC. When the PLC is started (enters the RUN mode),
the transferred parameter data will be enabled.
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
search engine
11 Batch Data Positioning Mode - TBL Instruction
11.4 Built-in Positioning Parameter Setting
A
B
Apx.
B - 159