Mitsubishi Electric FX3S Series User Manual page 37

FX /FX /FX
3S 3G 3GC
Common Items
Number of control
Interpolation
Pulse output
Pulse output
method
Maximum
frequency
Acceleration/
deceleration type
Positioning range
Program language
Position data
Connection of
manual pulse
generator
Detection of
absolute position
(Reads out the
current value of
Others
*1.
*2.
*3.
*4.
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
Model
axes
form
*1
Unit
-2,147,483,648 to +2,147,483,647 [× (Position data magnification
-2,147,483,648 to +2,147,483,647 [× (Position data magnification
-2,147,483,648 to +2,147,483,647 [× (Position data magnification
-2,147,483,648 to +2,147,483,647 [× (Position data magnification
ABS.)
• PLC input/output: 8 points occupied
(Points can be either input or output points.)
• From the dedicated start, the high-speed start by 1 ms at shortest is enabled.
• During positioning operation, the operation speed can be changed.
Do not exceed the maximum rotation speed of the servo motor or the stepping motor.
The position data magnification sets the 1, 10,10
The positioning range can be set in the range from -2,147,483,648 to +2,147,483,647 pulses.
Up to 200 points (table) can be set for the table operation.
search engine
FX
1 independent axis
Differential line driver
"Pulse train + direction" method
"Forward/reverse rotation pulse train" method
1,000,000Hz
Trapezoidal acceleration/deceleration,
approximate S-pattern acceleration/deceleration
pulse, m, 10
Sequence program (FROM/TO instruction, BFM direct designation)
1 point (set in sequence program)
Connectable
(Differential line driver, transistor)
Using the ABS instruction of the PLC
2
or 10
3 Comparison of Specifications
3.1 Comparison of Performance Specifications
-10PG
2N
-
-4
inch, mdeg
*2
*4
3
in parameters.
A
B
Apx.
*2
) pulse]
*2 *3
) m]
-4 *3
) ×10 inch]
*2 *3
) mdeg]
A - 15