Navigating; Entering The Settings; Table 4-2. Front Panel Setup Options With Associated Parameters - Lantronix SLB088411-01 User Manual

Note:
any unsaved changes if you take more than 30 seconds between entries.
Any changes made to the network, console port, and date/time settings take effect
immediately.

Navigating

The front panel has one Enter button (in the center) and four arrow buttons (up, left,
right, and down). Press the arrow buttons to navigate from one option to another, or to
increment or decrement a numerical entry of the selected option. Use the Enter button to
select an option to change or to save your settings.
Normal
up/down arrow

Entering the Settings

To enter setup information:
SLB™ Branch Office Manager User Guide
Have your information handy as the display times out without accepting
Action
To move to the next option (e.g., from Network Settings to
Console Settings)
To return to the previous option
To enter edit mode
Within edit mode, to increase or decrease a numerical
entry
Within edit mode, to move the cursor right or left
To exit edit mode
To scroll up or down the list of parameters within an option
(e.g., from IP Address to Mask)

Table 4-2. Front Panel Setup Options with Associated Parameters

Network
Settings
Eth1 IP Address
Eth1 Subnet Mask
Gateway
DNS1
DNS2
DNS3
1. From the normal display (host name, date and time), press the right arrow button
to display Network Settings. The IP address for Eth1 displays.
right/left arrow
Console Date /
Settings Time
Settings
Baud Rate Time Zone
Data Bits
Date/Time
Stop Bits
Parity
Flow Control
4: Quick Setup
Button
right arrow
left arrow
Enter (center button)
up and down arrows
right or left arrows
Enter
up and down arrows
Release
Firmware version and
date code (display only)
Restore Factory
Defaults
31