Events Commands - Lantronix SLB088411-01 User Manual

3. You have the following options:
4. To save, click Apply.

Events Commands

To manage the response to events that occur in the SLB branch office manager:
admin events add <trigger> <response>
<trigger> is one of:
<response> is one of:
SLB™ Branch Office Manager User Guide
SNMP Trap OID
Enter a unique identifier for an SNMP object. (An SNMP object is
anything that can hold a value and can be read using an SNMP
"get" action.) The OID consists of a string of numbers separated
by periods (for example, 1.1.3.2.1). Each number is part of a
group represented by the number on its left.
 To add the defined event, click the Add Event button. The event displays in
the Events table at the bottom of the page.
 To edit an event, select the event from the Events table and click the Edit
Event button. The Events page displays the event.

To delete an event, select the event from the Events table and click the
Delete Event button. A message asks for confirmation. Click OK.
|receivetrap|templimit|humidlimit|overcurrent|
action <syslog>
action <fwdalltrapseth|fwdseltrapeth> ethport <1|2>
nms <SNMP NMS> community <SNMP Community> [oid <SNMP
OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> deviceport
<Device Port # or Name> nms <SNMP NMS> community
<SNMP Community> [oid <SNMP Trap OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> pccardslot
<upper|lower> nms <SNMP NMS> community <SNMP
Community> [oid <SNMP Trap OID>]
action <emailalert> emailaddress <destination email
address>
12: Maintenance and Operation
204