Next Step; Figure 4-3. Completed Quick Setup - Lantronix SLB088411-01 User Manual

5. To logout, type logout at the prompt and press Enter.

Next Step

After quick starting the SLB branch office manager, you may want to configure other
settings. You can use the web page or the command line interface for configuration.
SLB™ Branch Office Manager User Guide

Figure 4-3. Completed Quick Setup

 For information about the web and the command line interfaces, go to
5: Web and Command Line
 To continue configuring the SLB device, go to
Interfaces.
6: Basic
4: Quick Setup
Parameters.
39