Lantronix SLB088411-01 User Manual page 107

2. Enter the following:
3. View or enter the following information for each outlet:
SLB™ Branch Office Manager User Guide
Switching Delay Number of milliseconds the SLB branch office manager between
subsequent switching. The range is 1000-2500 msec. The
default is 2000 msec (2 sec).
Over Current If SNMP traps are enabled (see 7:Services), a trap (alarm) is
Alarm
sent if the total current for all outlets exceeds a threshold. Enter
the number of amps (measured in tenths of an amp) above
which the SLB device sends a trap. The maximum is 180.
Note:
CLI.
Current Level for
Displays the total load carried by the outlets.
all Outlets
Outlet
Displays the number of the outlet being configured.
Status
Displays the current state of the outlet.
Name User-configurable name identifying the outlet.
Description User-configurable text describing the outlet.
(optional)
Power State
Select whether the power should be on or off. Default is Off.
Wakeup Mode Select whether, after a reboot, the power state for the outlet
If the alarm goes off, a warning message displays on the
8: Device Ports
107