Table of Contents
Advertisement
5. Click the Apply button.
Note:
You must reboot the unit before your changes will take effect.
NIS Commands
These commands for the command line interface correspond to the web page entries
described above.
SLB™ Branch Office Manager User Guide
Secure Lantronix
Right to view and manage secure IT management units (e.g.,
Network
SLP power managers, Spiders, SLC console managers, SLB
branch office managers) on the local subnet.
Local Users
Right to add or delete local users on the system.
Remote
Right to assign a remote user to a user group and assign a
Authentication
set of rights to the user.
SSH Keys
Right to set SSH keys for authenticating users.
User Menus
Right to create a custom user menu for the CLI for NIS users.
Reboot &
Right to use the CLI or shut down the SLB branch office
Shutdown
manager and then reboot it.
Firmware &
Right to upgrade the firmware on the unit and save or restore
Configuration
a configuration (all settings). Selecting this option
automatically selects Reboot & Shutdown.
Diagnostics &
Right to obtain diagnostic information and reports about the
Reports
unit.
Web Access
Right to access Web Manager.
Device Ports
Right to enter device port settings.
PC Card
Right to enter modem settings for PC cards.
Power Outlets
Right to configure power outlets.
11: User Authentication
148
Advertisement
Table of Contents
