Interacting With A Device Port - Lantronix SLB088411-01 User Manual

Interacting with a Device Port

Once a device port has been configured and connected to an external device such as the
console port of an external server, the data received over the device port can be
monitored at the command line interface with the connect listen command, as
follows:
To connect to a device port to monitor it:
connect listen deviceport <Port # or Name>
In addition, you can send data out the device port (for example, commands issued to an
external server) with the connect direct command, as follows:
SLB™ Branch Office Manager User Guide
single outlet.
slp envmon
Displays the environmental status (e.g., temperature and humidity)
of the SLP power manager.
slp infeedstatus
Displays the infeed status and load of the SLP power manager.
slp system
Provides system information for the SLP power manager.
sensorsoft lowtemp <Low Temperature in C.>
Sets the lowest temperature permitted for the port.
sensorsoft hightemp <High Temperature in C.>
Sets the hightest temperature permitted for the port.
sensorsoft lowhumidity <Low Humidity %>
Sets the lowest humidity pemitted for the port.
sensorsoft highhumidity <High Humidity %>
Sets the lowest humidity permitted for the port.
sensorsoft traps <enable|disable>
Enables or disables traps when specified conditions are met.
sensorsoft status
Displays the status of the port.
8: Device Ports
97