Lantronix SLB088411-01 User Manual page 189

To view keypad settings:
admin keypad show
To set the FTP/TFTP/SFTP server used for firmware updates and configuration
save/restore:
admin ftp server <IP Address or Hostname> [login <User Login>]
[path <Directory>]
To view FTP settings:
admin ftp show
To set the FTP server password and prevent it from being echoed:
admin ftp password
To restore the SLB device to factory default settings:
admin config factorydefaults [savesshkeys <enable|disable>]
[savesSLBert <enable|disable>][preserveconfig <Config Params to
Preserve>]
<Config Params to Preserve> is a comma-separated list of current configuration
parameters to retain after the config restore or factorydefaults:
nt – Networking
sv – Services
dt - Date/Time
po – Power Outlets
To restore a saved configuration to the SLB branch office manager:
admin config restore <Config Name> location
<default|ftp|sftp|nfs|cifs|pccard> [nfsdir <NFS Mounted Dir>]
[pccardslot <upper|lower>] [keepconfig <Config Params to Keep>]
[preserveconfig <Config Params to Prserve>]
<Config Params to Preserve> is a comma-separated list of current configuration
parameters to retain after the config restore or factorydefaults:
nt – Networking
sv – Services
dt - Date/Time
po - Power Outlets
To save the current SLB configuration to a selected location:
admin config save <Config Name> location
<default|ftp|sftp|nfs|cifs|pccard> [nfsdir <NFS Mounted Dir>]
[pccardslot <upper|lower>]
SLB™ Branch Office Manager User Guide
lu - Local Users
dp - Device Ports
pc – PC Card
lu - Local Users
dp - Device Ports
pc - PC Card
12: Maintenance and Operation
189