Lantronix SLB088411-01 User Manual page 152

4. Select or clear the checkboxes for the following rights:
5. Click the Apply button.
Note: You must reboot the unit before your changes will take effect.
SLB™ Branch Office Manager User Guide
Group
Select the group to which the LDAP users will belong:
Default Users: This group has only the most basic rights. You can
specify additional rights for the individual user.
Power Users: This group has the same rights as Default Users
plus Networking, Date/Time, Reboot & Shutdown, and
Diagnostics & Reports.
Administrators: This group has all possible rights.
Full Administrative
Right to add, update, and delete all editable fields.
Networking
Right to enter Network settings.
Services Right to enable and disable system logging, SSH and Telnet logins,
SNMP, and SMTP.
Secure Lantronix
Right to view and manage secure IT management units (e.g., SLP
Network
power managers, Spiders, SLB branch office managers) on the
local subnet.
Date/Time Right to set the date and time.
Local Users
Right to add or delete local users on the system.
Remote Right to assign a remote user to a user group and assign a set of
Authentication rights to the user.
SSH Keys Right to set SSH keys for authenticating users.
User Menus Right to create a custom user menu for the CLI for LDAP users.
Reboot & Right to use the CLI or shut down the SLB branch office manager
Shutdown and then reboot it.
Firmware &
Right to upgrade the firmware on the unit and save or restore a
Configuration
configuration (all settings). Selecting this option automatically
selects Reboot & Shutdown.
Diagnostics & Right to obtain diagnostic information and reports about the unit.
Reports
Web Access Right to access Web Manager.
Device Ports
Right to enter device port settings.
PC Card Right to enter modem settings for PC cards.
Power Outlets
Right to configure power outlets.
11: User Authentication
152