Sylog Logging - Lantronix SLB088411-01 User Manual

Sylog Logging

Data can be logged to the system log. If this feature is enabled, the data will appear in
the Device Ports log, under the Info level. The log level for the Device Ports log must be
set to Info for the data to be saved to the system log. (See
To set logging parameters:
1. In the top section of the Device Ports – Settings page, click the Settings link in the
Logging field. The following page displays:
2. Enter the following:
Local Logging
SLB™ Branch Office Manager User Guide
Local Logging If you enable local logging, each device port stores 256
Kbytes (approximately 400 screens) of I/O data in a true
FIFO buffer. Disabled by default.
Clear Local Log Select the checkbox to clear the local log.
View Local Log
Click this link to see the local log in text format.
8: Device Ports
7: Services.)
100