Power Commands - Lantronix SLB088411-01 User Manual

Branch office manager
Table of Contents

Advertisement

14: Command Reference
remoteipaddr <negotiate|IP Address>
restartdelay <PPP Restart Delay>
service <none|telnet|ssh|tcp>
sshauth <enable|disable>
sshport <TCP Port>
stopbits <1|2>
tcpauth <enable|disable>
tcpport <TCP Port>
telnetauth <enable|disable>
telnetport <TCP Port>
timeoutlogins <disable|1-30>
Description
Configures a currently loaded PC Card.

Power Commands

set power alarmthreshold
Syntax
set power alarmthreshold <disable|Tenths of Amps>
Description
Number of amps (measured in tenths of an amp) above which the SLB branch office manager
sends a trap. The maximum is 180.
Note:
If the alarm goes off, a warning message displays on the CLI.
set power outlet
Syntax
set power outlet <Outlet # or List or Name> <one or more parameters>
Parameters
name <Outlet Name>
description <Outlet Description>
state <on|off>
wakeup <on|off|laststate>
reboot
Description
Configures and controls power outlets.
Example
set power outlet 1-2,4 state on
SLB™ Branch Office Manager User Guide
255

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLB088411-01 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Slb088412-01

Table of Contents