Plug Removal; Figure 17: Pulling The Pull Tab; Figure 18: Removing The Plug Without Tools; Figure 19: Removing The Plug Using A Screwdriver - WAGO 750 Series Manual
Hide thumbs
Also See for 750 Series:
- Manual (248 pages) ,
- System manual (56 pages) ,
- Instruction manual (46 pages)
Table of Contents
Advertisement
46
Mounting
5.3.2
Plug Removal
1.
Remove the plug from the I/O module by pulling the orange pull tab on the
plug toward the top of the I/O module.
Figure 17: Pulling the Pull Tab
The plug detaches from the I/O module.
Figure 18: Removing the Plug Without Tools
2.
Alternatively, you can also use a standard screwdriver at the position
shown (in the figure below) to remove the plug.
Figure 19: Removing the Plug Using a Screwdriver
Manual
Version 1.4.3
WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Hide quick links:
Advertisement
Chapters
Table of Contents
