Plug Removal; Figure 16: Pulling The Pull Tab; Figure 17: Removing The Plug Without Tools; Figure 18: Removing The Plug Using A Screwdriver - WAGO I/O SYSTEM 750 Series Manual
2 ai ±10 v dc, differential inputs 2-channel analog input module ±10 v
Hide thumbs
Also See for I/O SYSTEM 750 Series:
Table of Contents
Advertisement
34
Mounting
Pos : 26.16 /Serie 753 ( WAGO-I/O-SYST EM)/Monti eren/Lös en des Stec kers vom I/O-Modul Serie 753 @ 4\mod_1240393485109_21.doc x @ 31214 @ 3 @ 1
5.3.2
Plug Removal
1.
Remove the plug from the I/O module by pulling the orange pull tab on the
plug toward the top of the I/O module.
Figure 16: Pulling the Pull Tab
The plug detaches from the I/O module.
Figure 17: Removing the Plug Without Tools
2.
Alternatively, you can also use a standard screwdriver at the position shown
(in the figure below) to remove the plug.
Figure 18: Removing the Plug Using a Screwdriver
Pos : 27 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
WAGO-I/O-SYSTEM 750
753-456 2 AI ±10 V DC, Differential inputs
Manual
Version 1.2.0
Advertisement
Chapters
Table of Contents
