Table 20: Hardware Options And Management Software Versions - Allied Telesis AlliedWare Plus Installation Manual

Chapter 10: Displaying the AlliedWare Plus Version Number
146
Table 20. Hardware Options and Management Software Versions
Optional Hardware
AT-StackQS Card and AT-
QSFPICU Cables
AT-StackQS Card and AT-
QSFPSR Transceivers
AT-StackQS Card and AT-
QSFPLR4 Transceivers
AT-x9EM/XT4 Card
Stack trunks of copper or SFP
Gigabit ports
7. Do one of the following:
If you need to upgrade the software on the switch, refer to the

Software Reference for x930 Series Switches, AlliedWare
Operating System from www.alliedtelesis.com.
If you do not have to update the software, repeat the procedures in

this chapter on the remaining switches of the stack.
8. If there are no further switches, power off all the switches.
9. Go to one of the following chapters:
Chapter 11, "Building the Stack with SFP+ Ports S1 and S2" on

page 147
Chapter 12, "Building the Stack with AT-StackQS Cards" on page

159
Chapter 13, "Building the Stack with Copper or SFP Gigabit Ports"

on page 165
Minimum Version of Operating
System
5.4.5
5.4.5-1
5.4.5-2
5.4.5-2
5.5.1-2.1