Feature Licenses - Allied Telesis AlliedWare Plus Installation Manual

Feature Licenses

The x930 Switches comes with the AlliedWare Plus operating system and
a base set of features that are available as soon as you install the devices.
Allied Telesis provides additional features in the AlliedWare Plus software
for the switches, but they have to be unlocked before you can use them.
They are unlocked with feature licenses from Allied Telesis. Refer to the
product's data sheet on the Allied Telesis web site for the list of licenses.
Here are the guidelines to feature licenses for a stack of x930 Series
switches:
The VCStack feature is part of the base features of the switches. It

does not require a feature license.
You may install feature licenses while the switches are operating

as stand-alone units or as a stack.
Depending on the feature license, you might have to order one

license for each switch or one license for the entire stack.
The switches will form a stack even if they have different feature

licenses. However, the additional features are only available on
those switches that have the necessary licenses. The stack
generates a warning message if it detects that the switches do not
have the same optional feature licenses.
x930 Series Installation Guide for Virtual Chassis Stacking
75