Plywood Base For A Wall With Wooden Studs; Figure 59: Switch On The Wall With A Plywood Base - Allied Telesis AlliedWare Plus Installation Manual

x930 Series Installation Guide for Virtual Chassis Stacking

Plywood Base for a Wall with Wooden Studs

If you are installing the switch on a wall that has wooden studs, Allied
Telesis recommends using a plywood base to attach the device to the
wall. (A plywood base is not required for a concrete wall.) Refer to
Figure 59.
Wall Studs
Wall
Plywood Base
Figure 59. Switch on the Wall with a Plywood Base
125