Performing Disablements; Zones; Loop Devices; Zone Devices - Teletek electronics iRIS8 Engineer Programming Manual

iRIS8 - Addressable Fire Alarm Panel – Installer Programming

4.8. Performing Disablements

This is a special maintenance menu for quick access to zones and devices menus and performing disabling/enabling of
the operation. Additional grid view menu for zones and devices makes the reviewing more easer and informative.
The installer can also review the addresses of attached devices to zone and loop numbers.
In the last menu, the user can disable/enable the operation of the panel's outputs.
Enter MAINTENANCE- DISABLE menu.

4.8.1. Zones

Press the ZONES button for quick access to zones programming menus.
See for details item 3.1 for zone settings and

4.8.2. Loop Devices

Press the LOOP DEVICES button for quick access to loop devices programming menus.
See for details item 3.2.6

4.8.3. Zone Devices

Press the ZONE DEVICES button. This is a special grid view menu presenting the attached devices to zone and loop
number. The devices are reviewed at several screens, as 50 address numbers are displayed at the same time. The
user sets the loop and zone number to review the attached devices.
Enter loop number (1-8) and zone number (1-200).
The screen displays the attached devices to the set loop
and zone number. The present attached devices are
displayed with active blue buttons. The devices not
attached to the set loop and zone are displayed with
inactive grey buttons.
The devices in fault are presented with active yellow
button.
For quick entry into the programming menu of a device
press the active button.
Press EXIT button to return back to DISABLE menu.
3.1.5
for device settings and 3.2.7
Quick summery of the submenus:
- Quick access to ZONES programming menu
- Quick access to DEVICES programming menu
- Grid view of attached devices to zone and loop
number
- Menu for disabling/enabling the operation of the
panel's outputs.
- Quick grid view of zones (by number) and loop
devices (by address) operation status
for zones grid view mode.
for devices grid view mode.
Press active button next to Zones field and set other zone
number to review the attached to it devices.
The device address numbers from 51 to 250 are reviewed
using the arrow buttons.
Note: The disabled devices are not presented in ZONE
DEVICES grid view menu. The disabled devices can be
reviewed only in LOOP DEVICES grid view menu – see
item 4.8.2.
72