Set The Voipu Lines As Ddi Mode; Assign Each Voipu Line To A Trunk Group - NEC XN120 Manual
Hide thumbs
Also See for XN120:
- Feature manual (222 pages) ,
- Getting started manual (83 pages) ,
- User manual (40 pages)
Table of Contents
Advertisement
Configure Incoming Calls
Set the VOIPU lines as DDI Mode.
At default all lines are set as Normal (i.e. Non-DDI).
Program 22-02-01
You will need to change this
setting for each VOIPU line.
! Ensure that you set the lines
to DDI for all of the 8 night
modes.
! Ensure that you change the
correct VOIPU trunks to DDI,
do not change an analogue
trunk to DDI type as this will
stop it working correctly.
Assign each VOIPU line to a Trunk Group.
At default all lines are in Trunk Group number 1. All VOIPU trunks should be assigned to the same Trunk
Group number
Program 14-05-01
There are 25 trunk groups
available
! Ensure that you set the lines
to DDI for all of the 8 night
modes.
! Ensure that you change the
correct VOIPU trunks to DDI,
do not change an analogue
trunk to DDI type as this will
stop it working correctly.
20
22-02-01 Trunk 04
Mode1
Ø Select the correct trunk number with the Vol.
You will see the setting for night mode 1.
Ø Change the type to 3 to set the line as DDI.
Ø Press HOLD to confirm the entry and step to the next night
mode.
Ø When you have changed all 8 night modes to type 3 the next
trunk number will be displayed.
Ø Change this trunk to DDI type if required
Or
Ø Press DC several times when you are done to return to the
Program Mode.
(Press SPK to save changes and exit if you are finished).
14-05-01
Group No.
Ø Select the correct trunk number with the Vol.
Ø Enter the Trunk Group Number.
Ø Press HOLD to confirm the entry.
14-05-01
Priority
Ø Enter the Priority. This determines which trunks should be
used first from the selected Trunk Group.
Ø Press HOLD to confirm the entry and step to the next Trunk.
Ø Press DC several times when you are done to return to the
Program Mode.
(Press SPK to save changes and exit if you are finished).
TRK Type=3
p q
Trunk 1
1
p q
Trunk 1
1
XN120 Voice Over IP Card Guide
Press Vol p q
to select the
trunk number
keys.
Press Vol p q
to select the
trunk number
keys.
Press Vol p q
to select the
trunk number
Advertisement
Table of Contents
