Storage Devices; Hard Drive; Removing A Hard Drive - Sun Microsystems Ultra 2 series Service Manual

9
C H A P T E R

Storage Devices

This chapter describes how to remove and replace the Ultra 2 series storage devices.
This chapter contains the following topics:
Section 9.1 "Hard Drive" on page 9-1
Section 9.2 "Media Bay Chassis Bracket" on page 9-4
Section 9.3 "CD-ROM Drive or 4-mm/8-mm Tape Drive" on page 9-6
Section 9.4 "Diskette Drive" on page 9-9
9.1

Hard Drive

To remove and replace a hard drive, proceed as follows.
9.1.1

Removing a Hard Drive

1. Power off the system unit.
See Section 6.2 "Powering Off the System Unit" on page 6-2.
2. Remove the system unit cover.
See Section 7.1 "Removing the System Unit Cover" on page 7-1.
Caution –
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3. Attach the wrist strap.
Use proper ESD grounding techniques when handling components. Wear