Table of Contents
Advertisement
SITRANS FM100
9.3.1.2
When setting parameters with a numerical value, the assigned unit is always
displayed below the input field in square brackets in the input function. The
maximum size and the number of decimal places are fixed and cannot be
changed. After calling the input function, first the left, outer digit is displayed in
orange. This position can now be adjusted either with the keys
value from 0 to 9. By pressing the key
the next digit can be changed. By pressing the key
moved to the left again. If the editing point is on the far right, the set value is
saved by pressing the key
function.
10. Device configuration
10.1 Sequence of device parameterization
The flowmeter FM100 is pre-configured in factory. Changing the parameters
"Measuring range" and "Sensor constant" or "K factor" is therefore not permitted.
The adjustment of these parameters is only possible on the part of Siemens -
factory.
In the event of subsequent changes to volume or throughput units, the dependent
parameters are converted and adjusted accordingly. However, the limit
parameters of the switching outputs must always be checked and adjusted
manually when adjusting volume or throughput units - these are not automatically
converted.
An accidental change of the parameterization can be revised by the function
"Reset factory setting" in the menu Userservice / Reset.
10.2 Language
In this menu item the menu language can be changed in English, German,
French or Spanish (standard: English).
Parameter table language
Sublevel parameter
level
English
Deutsch
Francais
Espanol
page 16
Numerical value input
Sub-
Sub-
Sub-
para-
para-
para-
meter
meter
meter
level 1
level 2
level 3
, the entry point moves to the right and
again and switched to the higher-level menu
Description
Selects English as the
menu language
Selects German as the
menu language
Selects French as the
menu language
Selects Spanish as the
menu language
in the
, the editing point can be
Value
Standard
range /
value LPM
value list
English
A5E48762204-AB
Standard
value
GPM
Advertisement
Table of Contents
