Color Table - MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual

Operation
i
5.6.5
The color table shows the learned colors and color groups.
In the color table, the individual colors are assigned to the color groups and thus to the output configuration.
In the color table, the color name, the distance model, the tolerance sizes and the hold time, can be custom-
ized for each color group.
Auto-resetting the hold time is only useful for a triggered measurement.
The color values of the learned colors can be changed individually.
New colors can be taught and added to the corresponding color group memory. Individual colors, entire
color groups or the entire color table can be deleted.
i
Fig. 44 Color table window
colorSENSOR CFO
If you use the trigger outputs switch, then the hold time is on until you get a new trigger signal. In this
case, it is recommended to reset the output configuration to Color not recognized after the hold
time has elapsed.

Color Table

Go to the Settings > Color table
The Add new color group button teaches the current color to the next free color group memory.
menu, see Fig. 44, see Fig. 45.
Page 95