Output Configuration - MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual

Installation and Assembly
4.3.6
The switching outputs are connected as follows:
NPN
Fig. 17 Output configuration (schematic)
The switching behavior (NPN, PNP , Push-Pull) is
The NPN output is, for example, suitable for adaptation to a local TTL logic circuit with auxiliary voltage of V
= 5 V.
The switching outputs are protected against polarity reversal, overload (< 100 mA), excessive temperature
and have an integrated self-induction recuperation diode for inductive loads.
Not electrically separated, 24 V logic (HTL), low level GND,
high level V
Model CFO100 and CFO200
Pin
5
6
8
colorSENSOR CFO

Output Configuration

V
H
R
L
Out
(max. 28 V)
+
Color Function Description
CAB-M12-8P-Bu-ge
Gray OUT0
Pink OUT1
Red OUT2
V
+
Out
R
L
PNP
programmable, see
Switching output, switchable
NPN, PNP , PP , outputs cor-
respondingly programmed,
detected color or color group
directly or in binary code.
V
+
Out
Push-Pull
5.6.7.
Comment
Not electrically separated, 24V logic
(HTL), low level = GND,
high level = V , I
+ max
H
= 100 mA
Page 35