Color Display - MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual

Operation
5.5.2
On the left side is the display of the color and the color values currently detected by the sensor. If the color
has already been saved in the color table and if it is within the set tolerance values, the corresponding color
group and the relative distance ∆E
In addition, the output from the set output configuration is available at 3 or 8 outputs. Here 1 corresponds
to OUT0 and 8 to OUT7 on the SYS
LOW, white is displayed and when switched to HIGH, green is displayed.
Fig. 28 Color display window
This is also possible in the Settings and Measurement menus.
You can make settings for the color group in the Settings > Color group
In the Home view, the following windows are displayed on the left side including the settings you have se-
lected under the
colorSENSOR CFO

Color Display

Click on the Add new color group button to create a new color group.
Settings, see 5.6
are also output.
rel
connector, see 4.3.1 and the I/O socket. When the output is switched to
menu.
menu, see 5.6.4.
Page 73