MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual page 18

Functional Principle, Technical Data
Type
Connection
Assembly
Temperature
range
Humidity
Shock (DIN EN 60068-2-27)
Vibration (DIN EN 60068-2-6)
Protection class
(DIN EN 60529)
Material
Weight
Compatibility
Control and indicator ele-
ments
Special features
FSO = Full Scale Output
1) Maximum color distance ∆E of 1000 successive measurements of the color value of a red and a dark gray
reference tile (R = 5%), measured with sensor CFS4-A20 at 1000 Hz and brightness adjustment with a white
standard (R=95%)
2) Adjustable up to max. 115200 kBaud
3) Optional connection via interface module
4) Also compatible with previous series (FAR, FAD, FAL, FAZ and FAS)
colorSENSOR CFO
Screwable optical fiber via FA socket M18x1, length 0.3 m ... 2.4 m,
Optical
8-pin flange connector M12A (Power/PLC); 4-pin flange socket M12D
Electrical
(PC/Ethernet DHCP-capable) (connection cable see accessories)
DIN rail mounting/screw connection via adapter (see accessories)
Storage
Operation
15 g / 6 ms in 3 axes, two directions and 1000 shocks each
Multi-color teach function, automatic adjustment of illumination brightness,
averaging depending on the measurement frequency,
CFO100
min. bending radius 18 mm
-10 ... +85 °C (+14 ... +131 °F)
-10 ... +55 °C (+14 ... +185 °F)
20 ... 80 % r. H. (non-condensing)
2 g / 10 ... 500 Hz in 3 axes, 10 cycles each
IP65 (when connected)
Aluminum, black anodized
approx. 200 g
with all CFS sensors
Operation via keypad and web interface,
visualization with 13 white LEDs
measurement signal amplification and
adjustable hold time of > 30 µs
CFO100(100)
4
Page 18