Deleting Color Table - MICRO-EPSILON colorSENSOR CFO Series Instruction Manual

Operation
5.4.3
When changing to a new recognition assignment, it is recommendable to delete the color table completely.
colorSENSOR CFO

Deleting Color Table

INT
TEACH
AUTO Output LEDs 1 - 8 flash.
CLR
OPT
GATE 1
TEACH 2
HOLD 3
ESC
MULTI 4
TOL
CLASSIFY 5
SPHERE 6
7
CYLINDER
BOX 8
To save:
INT
TEACH
AUTO
Output LEDs 1 - 8 output the set output circuit signal for No color detected.
With the factory settings 3 output LEDs illuminate on the CFO100 and 8 output
CLR OPT
LEDs on the CFO200.
GATE 1
TEACH 2
HOLD 3
ESC
MULTI 4
Quit:
TOL
CLASSIFY 5
SPHERE 6
CYLINDER 7
BOX 8
Press the CLR key for longer than 2 sec. to delete the color table
completely.
Press the ENTER key for longer than 2 sec. to confirm deletion of all colors.
Press the ESC key for longer than 2 sec to cancel deletion of all colors and
return to the operating mode without saving. The output LEDs output either
the recognition group or the output circuit for No color detected depen-
ding on the color detected.
Page 44