MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual page 107

Operation
Sensor keys
Automatic modulation
Delete learned colors
Delete learned color groups and
colors
Fig. 51 Differentiated list of functions
Trigger Type Selection
Level:
H
L
Low level
High level
When the state changes from Low to High or from High to Low, signal edges occur. These are meaningfully
Fields with gray
referred to as positive or negative edge-triggered.
background re-
quire a selection.
Rising edge
Fields with dark
Falling edge
Val-
border require
ue
entry of a value.
colorSENSOR CFO
Here, the Membrane keypad on the controller is unlocked with the cor-
Unlock
responding trigger signal.
Lock In this case, the keyboard is locked when the corresponding trigger
signal is received.
i
Locking the keypad is recommended, as the controller is then
protected against unintentional adjustment.
Here , see
measurement frequency and the detector modulation.
This function deletes all learned colors in all color groups. However, the
color groups remain.
This function deletes the complete color table.
High (H; 1) or Low (L; 0)
Change of state between L (< V
stored function is executed.
Change of state between H (> V
stored function is executed.
5.6.3.3, the controller settings are adjusted depending on the
Meaning
State is present at the input for a longer period.
High, is live and logical 1
Low, logical 0
As long as a low level < V
+
stored function is executed.
As long as a high level > V+/2 ±5 % (max. 30 V) is present at
the input, the stored function is executed.
/2 ±5 %) to H (> V /2 ±5 %). During this change, the
+ +
/2 ±5 %) to L (< V /2 ±5 %). During this change, the
+ +
/2 ±5 % is present at the input, the
Page 107