Configuration Of The Cfo Controller; Membrane Keys - MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual

Operation
5.2
The colorSENSOR CFO can be configured using the network interface, the web interface, the serial interface
and the keypad integrated into the housing. Due to the controller's range of functions, only the most impor-
tant settings are possible via the keypad. So for special applications, it may be necessary to use the web
interface, see
5.3
The keypad has a number of keys and LEDs.
The most important settings and controller operations can be activated via the keys:
- Adjusting illumination intensity (INT)
- Teaching colors (incl. tolerance) (TEACH or TOL)
- Clear color groups / color table (CLR)
- Setting the controller behavior (OPT)
- Adapting standard tolerance (TOL)
i
colorSENSOR CFO

Configuration of the CFO Controller

5.5, network interface or serial interface for initial setup.

Membrane Keys

ƒ Triggered teach
ƒ Triggered evaluation
ƒ Hold time
ƒ Single/multiple teaching operations(Multi teach)
ƒ Changing tolerance model
The keys can be locked and unlocked with the key combination ESC - ENTER - ESC.
Page 41